How to braid a braid Fish host

As a rule, in all schemes of weaving braids it is shown how to weave a braid on another person, but more often we have to weave it on ourselves and today we will show you how to braid the fish tail to itself.

To weave a braid fish tail, we will be on one side - it is very convenient to do and this option is now very fashionable. In addition, we will tell you about one little trick, which will help give the volume and a little “disheveled” look of our fish spit.

To do the hairstyle, prepare a comb, a gum to fix the tip of the braid, and to do our little tricks you will need a thin rubber band (you can buy such rubber bands in sets of 50-100 pieces at any cosmetics store) and scissors.

How to braid a fishtail to itself:

Carefully comb your hair combed it to one side, if desired, you can leave the parting. Now we take a thin elastic band and with its help we fix a low tail. Please note - the hair should not be put behind the ear, they cover it free falling down. Another important point - it is unnecessary to wrap the rubber band on the tail several times; it is enough just to put it on the tail. The stronger the elastic at the base of the tail is tightened, the less voluminous the fish tail will be in the end. The rubber is not left at the base of the tail, but below the earlobe (approximately in the middle of the neck). Next, divide the hair in the tail into two halves, in each hand take one piece.

With the left hand we separate the thin strand from the left side with the edge and transfer it to the right. Now, with our right hand, we will remove a thin strand from the right side and transfer it to the left.

We continue the weaving by throwing alternately identical in thickness strands from one half to the other, taking them from the outer edge.

Dovelet fish host to the very tip of the hair, securing at the end of the second rubber band. You can use the same as at the beginning of the tail (thin and inconspicuous) and you can use decorative with decoration.
When the braid is woven we will take scissors in hands, we will a little pull away the first rubber band from the hair and carefully cut it. The weave at the base will immediately weaken, with our hands we will weaken it along the entire length of the braid.

If you have not very long hair or are cut with layers of different lengths, then perhaps strands on the other hand will fall out of the weave. This is not a problem - twist them on curling. That way you give your hairstyle an even more gentle look.

So, braiding the fishtail itself turned out to be a very simple matter, which can be handled in just 5 minutes. As a result, you get a very fashionable and beautiful hairstyle.

Step-by-step guide to weaving a fishtail spit

Step 1. Stir your hair a little on top.

Step 2. Take a small section of hair from the middle of the back of the head and divide the hair into two parts.

Step 3 + 4. Take a small strand of hair from the outside of the right side, cross it over the right side to attach it to the left side of the hair.

Shago 5 + 6. Take a small strand of hair from the outside of the left side, cross it over the left side to attach it to the right side of the hair.

Step 7. Repeat these steps all the way down the back of the head. Continue weaving along the entire length of the "tail".

Step 8. Secure the ends of the braid. “Fishtail” looks beautifully slightly disheveled.

To achieve this look, gently stretch, loosen the weave. It is normal if it is uneven or small tails fall out.

Who is the fish tail for?

The best model for this braid will be a girl with a perfect head of hair - straight, tough, thick and quite long. But this does not mean that strands of medium length or light curls are not suitable for this beautiful hairstyle.

On them the hairstyle will look even more interesting, however, as well as on highlighted or colored strands. Moreover, girls with thin and thin hair can also look at the "fish" braid, because it is the best way to hide these nuances.

Preparing to weave braids

Fishtail hairstyle does not require complex tools and devices. Everything you need is in the closet of each of you. It:

• Thin gum of any color,
• Massage brush,
• Varnish, mousse or any other means for fixing the hair,
• Elements for decoration - flowers, ribbons and other decorations,
• Mirror - preferably two.

Learning to weave braid

A simple but very fashionable fishtail exists in at least three versions. Consider them in our detailed master class.

1. My head, grease the strands with mousse to give volume and dry them with a hairdryer.
2. We put the mirror opposite each other. You should see a reflection of the back of the head.
3. Brush your hair well and divide it in half.
4. On each side, choose one thin strand (approximately 2-3 cm wide).
5. We cross them among themselves.
6. Holding the weaving with one hand, with the other we select the same strand on one side and cross it with the upper strand of the braid.
7. We change the hand and separate the strand from the other side. We cross it with the previous one.
8. We perform the braid to the desired length, alternating sides and crossing the strands.
9. Tie the spit with a rubber band or fasten with a barrette.

1. With my head, grease the strands with mousse to give volume and dry them with a hairdryer.

2. Brush your hair well and collect it in a horse's tail.

3. We perform weaving according to a pattern known to you.

4. Tie the spit with a rubber band or fasten with a barrette.

1. My head, grease the strands with mousse to give volume and dry them with a hairdryer.
2. Brush your hair well.
3. The first thin and symmetric strands are taken from the temples.
4. On the back of our heads we cross them together.
5. Holding the weave with our free hand, the other is separated from the left temple by another strand.
6. Cross it with the top.
7. We change hands and separate the same strand, but on the right.
8. We cross it with the previous one.
9. Perform a pigtail to the desired length.
10. We tie the tip of the braid with a beautiful rubber band.

The location of the spit depends entirely on your tastes. Put it in the center, braid it on its side, or zigzag it over the entire head. And you can completely braid two braids, if the density of the hair allows you to go for it.

Decorate the fish tail

Now you know how to braid a fishtail braid in three versions at once. It remains to decorate your hair with fresh flowers or hairpins with decor. Various ribbons, laces, chains, rhinestones and feathers, woven into the braid along with the hair, are also suitable for these purposes. The braid itself can be very tight and neat, as well as loosely romantic. In the latter case, you need to slightly stretch the spit lobules, thereby giving it an openwork look.

Knowing how to braid the “fishtail” correctly, you will be irresistible both on holidays and on weekdays. Dare and remain in a fashionable trend!

What do you need for a haircut?

Before weaving a fishtail, remember: in this case, a mandatory element is a mirror that will help you remember the process of weaving. You will also need a massage comb, elastic bands to fix the hair, mousse or spray, which will give her a beautiful volume. It is best to do fishtail on clean hair, although this hairstyle is good because it can hide the lack of freshness of curls. If there are no styling products at home, you can replace them with clean water.

Spin the fish tail yourself

Pigtail fishtail trailing on clean, carefully combed hair. After the first stage is completed, wet the hair with a spray bottle so that it becomes supple. If the hair is too thin, they have no natural volume, or the strands are constantly knocked out of the hairstyle, use special fixing means.This will help make the fish tail elastic, brilliant, and the process itself - easy.

The braid weaving is pretty simple, but it may not work the first time. It is important to follow the following guidelines:

• Comb your hair back, turn it on its side, left or right. In such a position it is most convenient to weave a pigtail itself.
• Then divide the hair into two equal parts - this is very important! At the same time, hold each in your hand.
• From the first part you need to separate the thin (or thick) strand with your fingers, depending on the thickness of the final braid, throw it into the next part, connecting it with the rest of the hair.
• Now you need to separate the same thickness of the strand from the second part of the hair and throw it into the first.
• Creating a hairstyle is to perform monotonous, identical actions before getting a result. The separation of the strands, followed by throwing from one part of the hair to another, gradually creates a fishtail hairstyle.
• During weaving, make sure that the thickness of the strands was the same. In addition, you should weave a fishtail as tight as possible.
• If your hair is long, please be patient, it may even take an hour to make such weaving.
• When the braid is ready, secure it with a rubber band and release the side strands so that it looks voluminous and fluffy. This will give your hair romance, carelessness, sexuality. The fish host is, in fact, a light braid for all occasions. It looks elegant, sophisticated, festive, but at the same time, is considered everyday. Ideal for dating.
• If there is a desire to braid a fishtail not at the side, but at the back, you will need two mirrors, one of which should be installed behind, and the other - in front. This will help make the hair faster and adapt to the process of weaving.

How to trail a fishtail on someone else's hair

Weaving a fishtail braid is much more difficult than doing it on someone else's hair. First, to make such a hairstyle itself, it will take not only patience, but also some skills. It is especially difficult to braid the back of the braid, to complement it with a pile or to make several braids, depending on the complexity of the hairstyle. The pattern of fish tail weaving differs from the usual braid, in which three equal strands participate.

It is easier to make a fish tail to someone, since two free hands are involved in the process, you don’t need to use a mirror, other means to fix disobedient strands, except for the rubber bands. At the very beginning, the curls are moistened with water using mousse or fixing foam. If the hair is tight and thick, braid such a pigtail will be quite simple. As a rule, they obey well in their hands and hold their form for a long time.

There are many ways to weave braids on someone else's hair. A simple scheme of weaving fish tail is performed fairly quickly. To do this, carefully comb your hair and collect them from behind, divided into two parts. Next, select one strand, for example, on the left, starting from the temple, and move it to the right. Then take the same thickness of the lock on the right and move it to the left side. Should get cross weaving. Do everything, the same thing in the chosen sequence, not forgetting that it is monotonous, even tedious, to do such a scythe. At the end, fix it with a hair tie and fluff it in a known manner.

Braid fishtail vice versa

When the art of weaving spit fishtail reached its apogee, you can complicate the task and try to braid yourself this braid, but vice versa. The inverted version of the fishtail hairstyle is quite complex, you need to do it from the back, starting weaving from hair growth at the forehead.

• First, comb your hair and divide it into upper and lower strands.
• Take the upper strand, which goes from the frontal part, braid a small braid according to the previous scheme.
• Separate the remaining unused hair, then connect the right strand with the central one.Separate the thin strand from the very edge of the hair and attach it to the left one by swiping under the braid made earlier. Add to it the same strand, but to the right and bring it to the left. According to this scheme, you need to make a braid to the final result.
• When the fish tail on the back of your head is finished, proceed to weave it at the base of the neck according to the original pattern.
• During weaving it is important to ensure that the strands are equal, symmetrical and not pressed.

Other schemes

To make such a hairstyle step by step is not difficult if you have certain skills in this matter. Interestingly, the fishtail has many variations, one of which will appeal to young girls and schoolgirls. Braid yourself such a braid can be very fast. To do this, comb your hair, divide them into two parts with parting. One part should be on the left shoulder, the other on the right, so that you get two identical braids. Then, prepare yourself two rubber bands for fixing and begin to weave according to the above scheme, but do it not tight, but a little careless and loose. At the end fluff the resulting braid. Do the same with the second pigtail.

If you wish, braid yourself a spikelet (you need long hair) and wrap it around your head in the form of a natural rim. This hairstyle looks eclectic, very feminine. Complete the braid with various accessories. These can be colored locks, hairpins, ribbons, stealth, and clips.

Spit Fishtail

Hairstyles, including braids, are more popular than ever. They are combined with any outfit and add zest to the usual image. Braids are presented on the best catwalks of the world, they are loved by both modest schoolgirls and celebrities. If you want to be in the spotlight, decorate your hair with ribbon, flowers or follow it in the style of a fishtail.

Who is suitable for weaving fish tail

The ideal model for a hair braid Fishtail - a girl with thick long hair. This variant of weaving will look favorably on ladies whose hair is of medium length and even curly. If you masterfully master the technique, you can weave the masterpiece even on thin hair, creating the illusion of thick hair. Especially beautiful tail looks with colored strands, which adds brightness to the hairstyle. This option is ideal for laying and those who like to see on your head a slight effect of "disheveled".

How to braid a fishtail braid

Weaving such a braid is simpler than doing the classic Spikelet. According to the instructions, instead of three thin strands, only two should be separated. The length of the hair should be below the shoulders, otherwise the hairstyle may crumble. Another secret - by the end of the weaving should be more taut. For work, you will need a good hair brush, a tight elastic band or a barrette, a mousse or foam, if possible a photo or a weaving pattern before your eyes. If it is intended to be published, then flowers or ribbon are best for decoration.

How to weave a spike Fishtail

It is not difficult to weave a fashionable braid called Fishtail in the form of a spikelet. The main rule - strands, if possible, should be one in one in thickness and thin. From this factor depends on the elegance and accuracy of hair. How to braid a fishtail all over your head? This guide will help you do this:

1. Apply mousse or foam on clean hair. It is advisable to add volume to the roots.
2. Hair is divided in half.
3. It is necessary to select one not thick strand on each side and cross them together.
4. Pressing the weaving hand to the head, from the outer edge of one of the sides exactly the same strand stands out and intersects.
5. A similar procedure is done from the opposite side.
6. According to this principle, it is necessary to weave to the back of the head.
7. At this stage, you can stop working, or continue to the desired length.
8. If the fish spit from the top of your head is not yet within your reach, it is better to weave it from the tail on the back of the head, fixed with a tight thin elastic band.

How to make a fish tail with ribbon

100% success will cause hairstyle, if you decorate the braid with something bright. How to braid a fish tail with a ribbon? It is better if in color it will be combined with a dress and will not be too wide. The ribbon is woven from one side and moved to the other. When performing hairstyle follow the instructions:

1. Well-combed hair is divided in half.
2. From the outer right edge it is necessary to separate the thin strand and move it to the inner opposite edge.
3. Spit on this principle is not more than 2 cm.
4. The tape is applied to the outer edge of the right side, then moved to the left side.
5. Holding the ribbon in your left hand, shift the strand from the left outside to the right.
6. After separating the hair from the right side, attach it to the left. Roll the ribbon to the left side of the outer edge.
7. Shift it to the right side. Repeat the operation until the end of the hair.
8. The tip of the braid is better to fix the same tape.

Check out the easy ways to braid a girl's braid.

Volumetric braid Fishtail opposite

If the classic Fish Spit is no longer interesting for you, turn it inside out. To do this, change the weaving technique. The main point is that the strands are intertwined not from above, but from below. To learn how to make a “reverse” braid, this instruction will help you:

1. On the top there is a spikelet, only in the opposite direction (2-3 cm).
2. The central strand joins the right one, from which a little hair is separated. They are skipped under the scythe, connecting with the left side.
3. The remaining strand of the right side is held under the scythe.
4. Weaving on this principle is performed to the base of the neck.
5. Braided fish spit at the end is fixed with a rubber band. If necessary, stretch a little strand to add volume and slight negligence.

1 One braid

One fishtail braid can be braided from the top of your head to create a smooth, even hairstyle that is very much like a French braid. When creating this hairstyle, start braiding your hair just above the crown and move down to the base of the skull. From this point, braid loose hair to the tips. After that, you can fix a rubber band for the hair - and the hair is ready.

2 Double fishtail braid

Fishtail braids, braided on both sides of the head, can connect at the base of the skull and merge into one horse's tail or an elegant hairstyle. This is a modern variation of the classic fishtail spit. To make this hairstyle, divide the hair into two equal parts with a straight parting along the entire skull.

Braid the braid with one hand, and bring it to the middle of the base of the skull. Tightly secure it with a rubber band to hold it while you repeat the same steps on the other side of the head. Remove the gum from the first braid and connect them. Braid them in one braid, along the entire length to the tips. Secure with a rubber band.

3 Two fishtail braids

Two fishtail braids can be worn as an interesting variation of the usual fishtail braid. To create this image, divide the hair into two equal parts from the forehead to the base of the skull.

Braid the fishtail braid on one side, starting from the nape and moving along the hairline. Braid the braid further along the entire length of the hair.

Repeat the same on the other side to complete the hairstyle.

How to weave a fishtail braid: detailed scheme and photo

Spit fish tail is a decoration for a festive dinner or everyday pastime. This weave is different from the classic image. However, this is what attracts many girls.

Hair looks original and unusual. Some girls don't know how to weave a fishtail. Below is a diagram and photo equipment performance.

After studying these images, you can easily make yourself a beautiful hairstyle.

How to weave a fishtail itself?

With a certain skill and experience, you can learn how to braid your hair beautifully in the form of an unusual braid.You can do this procedure for long and medium hair at home. To do this, it is recommended to prepare all the necessary accessories:

• massage comb,
• scrunchy,
• studs and barrettes,
• means for fixing (varnish, spray).

Before weaving it is recommended to moisten the hair and apply mousse or conditioner. Thus, the strands will not electrify. The pigtail will turn out equal and beautiful.

1. All curls must be combed back.
2. From the temporal areas should be allocated to one strand (width 2-3 cm).
3. In the back of the head curls must be crossed (right side over the left).
4.

These strands must be fixed by hand.
5. On the left temporal region, you need to separate another curl.
6. Cross this strand with the right curl.
7.

This technology continues until the fishtail spit is fully created.

In order to weave a pigtail itself easily, it is recommended to make a tail before weaving. And fix the hair with the usual gum.

Options and methods for creating attractive hairstyles can be different. So, a fishtail can start from the top of the head. There are various types of braids fixed on the sides.

Original options for creating fishtail braids

For those who are already accustomed to traditional weaving, you can try different interpretations of the classic way. A spit braided on the back of the head will be a festive option. In this case, the hair on the crown should be heavily pre-combed. Thus, the hairstyle will have additional volume, look interesting front and back.

Women with long hair can try not braid hair tightly. Thanks to this, get a romantic and gentle image. The end of the fish tail can be slung over the shoulder. With this hairstyle, you can go on a date with your loved one. It is relevant for school or university classes. In addition, the braid can be made for work and everyday exit.

For owners of thick hair is recommended to make two braids. To do this, the hair is divided into a straight parting. After that on each part do weaving by the above described method. At the same time, braids can be woven to the end. Either the lower parts of the strands are left flowing.

As jewelry and accessories for this hairstyle should be preferred simple details. After all, the fishtail braid itself is stylish and beautiful. Therefore, it is not recommended to purchase for this hairstyle large hairpins and elastic bands with rhinestones.

How to braid "fish tail": a description of the techniques, examples with photos and a guide with all the subtleties

The weave on the hair is now gaining popularity again. And not in vain, because with the help of them you can make elegant attractive hairstyles for all occasions. Now there are already about 50 techniques of weaving for different lengths of hair.

But among them in the leading position in terms of beauty remains an interesting technique - “fish tail”. In this regard, in the framework of this article, we will further consider everything about this method of creating braids, and also examine how the fishtail is woven by the lightest techniques.

So weave looks like a fishtail.

The advantages of weaving "fish tail"

Weaving "fishtail" can be done by hand without the help of specialists.

In this way of creating braids, in addition to the amazing appearance, there are many advantages. Their list is as follows:

• can be woven on almost any type of hair (wavy, straight, curly, thin, thick and so on),
• harmoniously combines with many accessories adorning the head,
• allows you to create completely different images in various styles, as it has many variations that expands the range of possibilities and fantasies,
• It looks equally beautiful on any color, even the most fashionable and unusual,
• suitable for any type of clothing (from classic to casual style),
• can be combined with tails, other types of weaving, such as harnesses and other,
• It helps if you wish to collect both part and the whole mass of hair.

Step-by-step creation of an unusual fashionable hairstyle based on fishtail weaving.

But one of the main advantages of this weaving is the ability to do it yourself with your own hands, without recourse to specialists in salons. This is especially important for those individuals who do not have a large amount of extra time or do not want to waste their budget.

After all, to learn this technique, just enough to practice a little. Well, the following scheme of weaving a fishtail spit will help to maintain the correct sequence of the order of the strands in this process.

The weaving “fish tail” even on the most extraordinary hair color looks great, bringing its zest to the image.

Tight option

Spit "fish tail" created by taut weaving technique.

A feature of this braid is a dense weaving technique. Due to this, the picture is clear, textured and neat. But this is on condition that working loops are selected in a strictly identical width. This is the key to creating such a beautiful pigtail.

Surround option

With the help of purl weaving fishtail spit, you can achieve volume even on very sparse hair.

To achieve greater bulk, fishtail should be braided in the wrong way. That is, the steps in this process do not overlap each other, but, as it were, tuck under each work item. And the more spit will be braided, the more massive it will look. Even greater bulk can be obtained if weave not thick, but thicker strands.

In this case, it is not necessary to adhere to strict accuracy in this technique, since even careless parts will not spoil the appearance of the braid. In some styles, such as “Boho”, even deliberate disheveledness is specially used.

Openwork option

Option interesting hairstyle, created on the basis of openwork spit "fishtail".

Such a spit can be created both in the traditional and in the wrong way. Its peculiarity lies in beautifully drawn loops after weaving. Also, the openwork effect can be achieved if, after the weaving is completed, to grab the tips of the pigtails and pull the entire structure upwards, and then gently straighten it.

Beautiful hairstyle with elements of openwork weaving using the fishtail method.

It described the features and subtleties of various ways to create a "fish tail". Well, now came the moment to study directly how the fishtail spit braid. Read the instructions and go for it!

Description of the methods of weaving "fish tail"

If you disclose in detail the question of how a fishtail is braided, this is done by several technicians. The most time consuming and more difficult is the method of weaving from 4 strands. For beginners, 2 other methods are suitable.

The process of creating fishtail pigtails from the tail.

As for the direction, the “fish tail”, regardless of the method, can trail:

• upright
• horizontally,
• asymmetrically
• diagonally,
• zigzag
• around the circumference.

Weave from 2 strands

Step-by-step scheme of weaving a fishtail spit by dividing the hair into 2 strands.

This technique of creating a "fish tail" is considered the easiest to perform. Relative simplicity is achieved thanks to two guide strands that help in this process not to make mistakes.

As for the instructions, weaving the fishtail spit step by step using this method includes the following steps:

1. Before the process of creating hairstyles curls can be treated with mousse. This will give them obedience and prevent scattering from the hands.
2. Depending on obtaining the desired hairstyle (spit on the side, on the back of the head, on the top, around the circumference), you should select 2 (guides) basic uniform and fairly wide strands in the place where you plan to start weaving.
3. Then, on either side from the outside, an additional strand is selected from the remaining mass of hair, which must be transferred to the opposite side, then attaching it to the guide element located in this area.
4. After that, the strand is again taken from the outer area on the side where the additional curl has just occurred to the main guide part of the hair. Then in the same way it is added to the other opposite working guide.
5. All weaving technique is performed by the above described actions until the spit is reached to the desired place.
6. The tips (again, depending on the hairstyle) are folded under the hair, fixed with an elastic band, or a beautiful flower-like pattern is created from them with stealth hairpins and hairpins.

The fishtail braid can be combined with any weaving, for example, as in the photo - with the traditional option.

Weave without dividing the hair into parts

Without dividing the strands into working elements, the fishtail spit (weaving scheme with a photo is shown below) is braided like the previous technique. However, this method is suitable for those who already have the skill. After all, without having clear guides, from the first time it is not easy to create a beautiful braid, each time evenly selecting the strands woven around.

Step-by-step creation of fishtail weaving without division of hair into strands.

The instruction and the technique of weaving a fishtail spit directly consists of the following steps:

1. First, the whole mass of hair combed on themselves.
2. Then a working strand is taken from each side, and then they intersect with each other. It should be ensured that they were the same width.
3. Then, holding the hair with one hand by pressing them to the head, for example, on the right, the opposite hand again selects the strand on the same side.
4. Next, you need to throw it to the right, capturing and attaching the same hand to the total mass of hair.
5. A similar technique braids the whole pigtail “fishtail” by alternately grabbing the strands with their further throwing and attachment to the hair located in opposite parts of the head. The direction of weaving in this case is chosen any. It directly depends on what hairstyle on the basis of “fish tail” I want to get.

Examples of hairstyles based on "fish tail"

Another option is an attractive hairstyle based on a fishtail weave.

Using this weaving, you can create a huge variety of hairstyles. It has no restrictions, unless its own fantasy just runs out. And if this happens, taking the following options as a basis, it will be easier to re-invent some masterpiece on your head, emphasizing your delicate and harmonious taste and image as a whole.

Side option

If you weave a fishtail side braid a little carelessly, it will not lose its attractiveness and will not spoil the image as a whole.

This styling is suitable for all occasions, because it goes well with any clothing and makeup. It is distinguished by its accuracy and attractiveness, therefore it will become relevant for holidays and for everyday life.

"Malvinka" from the "fish tail"

Hair "malvinka" on the basis of weaving "fishtail".

This is the best option for romantic natures. It is ideal for a youth party, corporate event or, for example, a birthday. Such weaving can be combined with ribbons, and then you can achieve even more original image.

"Fish" braids on two low tails

Hairstyle from weaving "fishtail" on two low tails.

Owners of a luxurious head of hair can take note of this option. This hairstyle perfectly gives the image of femininity and looks truly gorgeous and stylish. Yes, and it combines harmoniously with almost any clothing: from jeans to evening dresses.

Laying of fishnet braids

Step-by-step creation of fashionable hairstyle from openwork fishtails.

If you want to get an elegant, extraordinarily beautiful image, then this hairstyle is the best choice. It can even be used for one of the most significant events in life - an anniversary or a wedding.

To do this, just after its creation, you just need to decorate your hair with an elegant hair clip or other similar accessory. Well, she herself is done very simply and quickly. This can be seen in the step by step attached photo.

At last

If you still haven't quite figured out how a fishtail is being woven, the video in this article surely should help. After all, for some, visual aid in action is more effective than written instructions with photos.

Or maybe our readers have their own secrets for weaving fish tails? We offer to share them in the comments.

Spit fish tail: 4 types of weaving with hairstyle features

Author Masha date Jun 16, 2016

There are a huge number of different types of weaving, one of these is the fishtail pigtail. It got its name because it has similarity with the tail of sea and river inhabitants.

There are several options for braiding fish tail

Fishtail is an interesting, original and unusual hairstyle, you can weave it for a friendly or business meeting, a walk, a date, and if you beat the weave and add some zest, the image is suitable for a wedding or other magnificent event.

Main hairstyle feature

Many people believe that weaving a fishtail braid should be on even and long hair, but employees in the field of hairdressing services by virtue of their practice, prove the opposite. Hairstyle for women:

1. With thin loose strands.
2. Rare and curly.

Perfectly and flawlessly weaving a fishtail looks on hair with highlighting or calorie, when 2 or 3 colors are interestingly mixed, an incredible picture is created.

Weaving scheme and step by step instructions

Approaching the practical lesson, we note that the fishtail hairstyle is woven very simply, but before that you need to see a few pictures with step-by-step actions.

• Dry your hair with a hairdryer, comb and lightly brush your hair with a foam brush so that each strand fits together,
• Divide into two parts - right and left,
• From the left take a fine strand and put on the part of the strands on the right,

• Now separate the thin strand on the right, and put it on the hair on the left,

• Throw fine strands from one side to the other, tightly tightening them together until you see a pigtail.

Tight pigtail

A great option for long straight strands without a cascade. In order to make a fishtail hairstyle taut, you need to prepare:

• Comb,
• Water spray
• Foam or mousse,
• Gum,
• Accessories (if you wish).

The scheme of weaving the fish tail is almost the same as described above, only in this case, the hair is selected from the forehead, and change places until the hairstyle is ready. Or a high tail is made, and then weaving. Originally looks like a fish tail in reverse.

Volume soft braids

If you are the owner of curly or curly hair, braid fish tail itself is not difficult, the hair will be incredibly bulky, fluffy and beautiful.

No less attractive looks fish tail inside out, which should be weaved according to the classic version, only twisting the strands and changing their places under the bottom of the hair.

Many fish tails

Making a fish tail is a simple and quick exercise, and if you turn on the fantasy, the hairstyle will be much more original and more attractive. Thanks to this weaving, you decorate your head with magnificent pigtails, and what they will be - the choice is yours:

• Two simple braids,
• This forehead smoothly goes in the opposite direction to the shoulder,
• From the forehead to the bun on the back of the head or the crown,
• Three or more braids with strands released, and other variations.

Side braid

If you know how to make a fishtail to yourself, it's time to practice with a hairstyle like a fishtail on its side.There is nothing complicated in it, only the weaving technique is transferred from the center of the head, one side closer to the shoulder.

Such hairstyles make high or low. Also decorated with various pins, pins, ribbons and other accessories.

Conclusion

If you decide to surprise those present at a party, a date or another event, this hairstyle will fit perfectly, because it is interesting, unusual and many-sided.

Spit fish tail will look beautiful in everyday life and at the celebration

Plus, if you beat it with some decisions, you will become a star of the evening, and all the attention will belong only to you!

All materials are provided for review. Before using recommendations concerning the health of your hair, we recommend that you consult with a specialist. Use of material is permitted only with the active hyperlink to the site.

How to braid a fashionable fishtail braid. Step-by-step instruction and scheme

Type of weaving "fish tail" or “the little mermaid” is called this way because such a scythe is a little bit like a tail of creatures that live in water.

Spit "fishtail" and to this day does not lose its relevance, because with its help you can create hairstyles that fit almost any image, and make their owners stylish and extraordinary.

Step by step instructions for weaving

Before you braid such a braid, you need to comb the strands well so that there are no difficulties when weaving.

First, you need to remove the hair back. Select two strands in the temples and connect them at the back of the head. More precisely, we cross them so that the weaving resembles multiplication sign.

We hold the connection of two strands with one hand, select another strand and in the same way impose it on top. Then, take a strand on the other side and also impose over the weaving.

Accordingly, we continue "in the same spirit."

After weaving, we fix the braid with a hairpin.

Who would suit this hairstyle?

Of course, you can braid it only on not too short hair. Best of all, it will look on owners of fairly long hair.

If you think that your length is not enough, you can use the straps on the hairpins.

Even if you did not manage to find strands similar in tone to your native color, use contrasting or multicolored.

Such weaving looks very stylish when the hair is painted in different colors. This hairstyle looks much more spectacular and easier when hair is straight.

A few simple hairstyles with a braid

Very popular hairstyle - shaggy fishtail. It attracts with its natural carelessness and fits even curly hair. Before you start weaving, you should select the facial strands, which should be a little ruffled. After weaving, you need to fluff up the already finished braid, in order to give it a lot of volume and raggedness.

"Fishtail" with curls looks extraordinary cute and feminine. Before weaving, we remove the facial strands, which we later wrap onto the curling iron. Visually, we divide the entire length of hair into identical parts, we weave the upper, fasten, and divide the remaining tail into small strands and twist them like facial ones.

Two fish tails look very impressive. It is necessary to divide the hair in the neck area into a pair of identical parts with a very even part, and braid each. To hairstyle has a special uniqueness, you need to try to do everything very carefully, symmetrical and smooth. And, you have to do it all the way.

Unusually stylish hairstyle - "fishtail" on its side. As you already understood, you just need to braid the fishtail braid with a slope on one side. To add asymmetry, you can pre-separate the facial strands on one side only.

From the spit "fishtail" on its side, you can create a charming "shell". Weave this braid with a slope on its side and wrap it with a shell.Hiding inside the ends secured with rubber and firmly fix the "shell" with studs or stealth.

Another variation of the two "fish tails" - hairstyle "fish." We weave two pigtails "fishtail", knock them down, and attach the tip of each with the help of stealth to the base of the other. This variation will look better on the hair. middle length.

For those who do not want to dye their hair, but want to get a multi-colored fishtail braid, we will recommend a haircut with multi-colored strands.

We purchase a pair of a set of colors that contrast with the natural color. Strands of one color are fixed closer to the region of the temporal areas of the two sides, false hair of the second color fasten on the back of the head. Further, as usual, weave a fishtail braid.

You can get a colorful "fish tail" with special colored chalk. First, decorate the selected strands with crayons in a variety of colors. It will be nicer and brighter if you select enough fine strands. Paint them a little backing away from the roots. After coloring weave a braid.

A bunch of fishtail with flowers is an excellent option for those who appreciate real femininity. Weave the standard "fish tail". Next, wrap it in a volume bundle, after a little rattling. We fix with invisible.

Take hairpins with small flowers and attach them around the beam. If you doubt the choice of flowers on hairpins, look for the most gentle and natural. The best colors are pastel colors.

But, if you wish, you can experiment with bright or dark.

2018 Weaving braids fishtail step by step photo instruction

The fish tail is not an ordinary two-strand braid. It has a rather interesting shape and will not leave indifferent any lover of braids.

It can be as tight, rather strict, and disheveled with light notes of negligence, which are now at the peak of popularity among young people. Learn to weave such a miracle on the forces of each. The fish tail lags even lighter than a regular braid.

The most important is patience, because the smaller the strands you take, the more beautiful the final result will be.

The easiest version of the weaving of fish tail

• • We comb the hair on the side, divide by hand into two equal parts,

• • From one of the strands we separate a small part of the hair from the far edge and shift it to the second strand,

• • Now we do the same manipulations with the second strand: we separate part of the hair from the far edge and shift it to the first strand,

• • We continue in the same spirit until the end,

• • Reaching the edge we fix the tip of a thin elastic band.

Try to separate the strands of the same size, then the spit will be more harmonious.

Spit fish tail from the top

This option is also quite possible to weave yourself, but initially it will be easier for beginners to practice on someone else.

• • We carefully comb the hair, separate a small part of the hair at the crown and divide it by sex,

• • On the right side of the right side, we separate the thin strand and shift it to the left side,

• • We do the same on the left side,

• • Next, separate the thin strand again to the right, complement it with a strand of hair remaining free and shift it to the next side,

• • We do the same on the left side,

• • We continue these manipulations on both sides alternately up to the occiput. When all the loose hair will be woven we will continue to weave in an elementary way by shifting the extreme strands of both parts alternately to each other. The end of the weaving fasten with elastic.

Spit can be left taut. And you can loosen a little by gently pulling the locks with your fingers from bottom to top.

Video lesson weaving braids fish tail

Fishtail can be both a hairstyle for every day, and a great addition to an elegant look. It is not rarely used even the bride for wedding hairstyles.

Having mastered the principles and mastering the technique of weaving a fish tail, you can turn into reality the most unusual ideas.

Suppose you can make such a scythe on its side, or braid two, or else make it a beautiful bezel, in general, fit to anything.

Instructions on how to weave a fishtail braid

Kosu fishtail can deservedly be called one of the most popular and convenient hairstyles. A long time ago, she fell in love with girls who braid their hair. Not out of fashion now, because this braid looks quite unusual and interesting.

The main feature of this braid remains versatility: fish tail can be braided under any outfit. It is ideal for everyday wear and for any activities. Excellent confirmation of this - Hollywood stars go on the red carpet with hair braided in a fishtail.

It is not surprising that everybody likes this braid, because it gives the image tenderness and romance.

How to weave a fish braid?

Every girl can learn how to braid it, including herself, the main thing is to train. There are no restrictions on this braid, because it looks good and neat on both chubby girls and girls. Hair length also varies from medium to long.

Fishtail can be braided both side and straightlying flat on his back. But if you have an uneven hair length (for example, a cascade), then braiding a strong braid can be quite difficult. However, there is a way out: leave strands loose in front.

From the side the hairstyle seems difficult, but in fact, it is one of the easiest braids to weave. So how is a fish tail done?

• Hair is prepared in the same way as for other hairstyles with a scythe. Comb your hair smoothly and use any moisturizer if possible. Of course, the best braid is going to unwashed hair. For a perfect effect, you can pre-straighten hair.
• We take on a thin strand of hair in the temples, on each side. Strands must be very thin! We take them to the back of the head and put the right on the left.
• Holding the crossed strands with one hand, take the same thin strand on the left. We bind it with the one that we hold in the other hand.
• Further the same is repeated, only with the right strand. That is, we take a thin strand on the right and cross over the left. Thus, what we have intertwined at the very beginning remains at the bottom.
• Again, take the strand on the left and weave it with the right, according to the previous scheme. We change the strands alternately and weave a braid to the growth line on the back of the head.
• So we got a scythe from which a horse's tail emerges. Now we stretch the strands out from under it and continue to weave as weave before. We reach the end of the hair and fix - ready! You can slightly fluff the braid, so that it is not tight, but looks airy and tender.

Recommendations for hair type:

• Straight lines Ideal for a smooth braid version. You can twist the hair curling or use the corrugation to give volume.
• Curly. If the hair is very curly, it is advisable to straighten it with a flat iron. However, you can experiment with wild curls.
• Wavy.

This styling on slightly wavy hair very beautifully looks. Weaving around the head or sideways looks especially romantic. Rare. If the hair is not thick enough, and the hair is thin, you'd better fit the fish tail with a fleece.

You can also tweak the hair slightly by curling or curl on the corrugation in order to give the locks more volume, and at the end of the weaving, carefully pull out the strands with your hands, fluff them. Thick. What you need to create a beautiful braid. If the hair is too thick, you can apply a fixative.

Colorized and highlighted. Especially beautiful are thin contrasting strands in the total mass of braided hair. Even if you have no staining, it does not matter: you can use chalk for short-term staining.

To braid a fishtail on a square or bean long to the chin, you need to choose the option of weaving around the head.Spun the bangs to the side and take very fine strands during the creation of the hairstyle.

Weaving braids at home: step by step instructions with photos

To braid a beautiful fishtail braid, you need to prepare your hair. To do this, wash them, lightly dry, comb and apply a small amount of styling. For weaving need the following devices:

• Two mirrors, located one opposite the other, or trellis (for a good view of the neck).
• Comb.
• Thin comb to separate hair.
• Elastic bands for fixing the finished pigtails.
• Accessories for decor.
• Fixatives (varnish, mousse, etc.).
• If necessary, use a curling iron or iron to prepare the hair for weaving.

• Divide hair into two equal parts.
• From the outside of the left side, separate the thin strand and wind it over the right side.
• Do the same with the opposite (right) part.
• Dock in this way to the desired length of the braid.
• Secure it with a rubber band.

• Divide the hair into three parts at the crown.
• Start weaving strands in the same way as when creating the reverse French braid: start the left strand under the center and right too.
• Combine two strands (left and center) into one. You should have two working strands.
• From the outer left side, separate the thin strand and wind it through the bottom under the right one. At the same time add to the working strand a thin lock of the main mass of hair.
• Do the same with the right work order.
• Process according to the specified pattern of weaving hair to the desired length of the braid.
• Secure with a rubber band.

French (from the top)

• Separate three narrow strands on the crown so if you were braiding a simple pigtail of three strands.
• Put the left strand on top of the center, right - in the same way, but in mirror image.
• Next, combine two strands (left and center) into one. Thus, you get two working strands.
• From the left, separate the thin strand (as in the classic version described above) and connect it with the right one. Then separate a thin strand from the total mass of hair and attach it to the working one.
• Alternate the addition of thin strands left and right until the loose hair runs out. Then braid a simple fishtail. At the end, fix the hair with a rubber band.

• Comb the hair on the side on which you will be weaving.
• Fix the hair with a thin disposable elastic on the side.
• Split the curls into two working areas, as in the previous diagrams.
• Weave to the desired length.
• When the braid is ready, cut the gum.
• Lightly spray hair with lacquer.

• Divide the hair into two equal parts, each of which fix inconspicuous disposable rubber band.
• Each of the tails formed braided in a fish tail and secure with a small rubber band.
• Place the left pigtail around the head from the nape to the forehead through the temples. Attach it to the bulk of the hair stealth.
• Do the same with the right tail, turning it into a pigtail and jokes to the head of the invisible.

• Begin weaving should be the same as in the classic version.
• Having made 2-3 cross-weaves, wind a thin long tape folded in two by the braid at its base. Attach it invisible or simply tie to the base of the pigtail.
• Continue weaving according to the classical scheme, seizing the ribbon along with the hair.
• When you reach the end, fix the edge of the braid with the two ends of the ribbon, tying a bow out of them.

• Stir hair at the crown and the back of the head. Lightly spray with lacquer for extra hardness and fixation.
• Weave a braid according to the classical scheme, without tightening the strands tight.
• When you are finished braiding, gently pull the strands from both sides with your fingers to give the hairstyle even more pomp.
• Secure the end of the braid with a barrette.

Useful tips when creating hairstyles

The end of the braid, not fixed with a barrette or an elastic band, looks originally.To finish the hair in this way, it is recommended to comb the resulting tail at the end of the pigtail and spray it with varnish.

When separating the strands, it is most convenient to do this with the finger of the little finger or a comb with a pen-spoke.

If you want to get a loose, airy pigtail, slightly pull the strands out of it. This should be done simultaneously from two sides so that there is no asymmetry.

To prevent the hair from sliding too much, you can treat it before starting to weave with special powder for hair. It will give a little stiffness to the hair and the strands will not slip.

If you do not have enough natural volume, you can use the iron with a nozzle-corrugation.

Want to get a clearer structure? Then use dry shampoo, hair powder or wax.

How to decorate the finished hairstyle?

• If you are planning to wear a romantic chiffon dress or a sundress and do a light make-up, a bow, a fabric bandage and a scarf will look charming with a braid.
• Such accessories as hairpins with rhinestones, invisible and studs with stones and beads will suit the glamor image.
• For a strict business look'a more minimalist jewelry is perfect: for example, a thin headband with almost no decor.

If you are planning to create a bold rebellious image, you can use the overhead multicolored strands on the elastic bands, which need to be woven into the braid. For the same purpose, bright floss threads or cords are great.

With oblique "fishtail" can be combined with other hairstyles. For example, make Malvinka with a pile in the parietal zone and braid it with two braids. It also looks very nice kind of pigtails, braiding like a snail the whole head.

Simple and at the same time stylish looks high ponytail, braided in a bony tail. You can braid 2-3 fish tails and combine them into one common braid. As you can see, the options for this hairstyle can be very much!

2 ways to quickly plexus exquisite fish tail

The strange name of the hairstyle is explained simply: the original weave looks like the bizarre play of ornamental fish scales, and the elegant braid brings to mind the image of a beautiful mysterious mermaid. How to weave a fishtail so that the curls lie neatly and the hairstyle takes on an elegant look? It's simple, the technique is so simple that making a fishtail, looking in the mirror, on one side (or two on two) without difficulty can even be a first-grader, if mother has no time

Fishtail hairstyle

Who is the fishtail hairstyle

A fish tail will decorate every girl regardless of the fullness of her face, figure, neck length, or height. In addition, the braid is suitable for women of any age category: babes, young girls, mature beauties, aged matrons.

Options hairstyles, based on the mermaid spit - a great many

Spit can start from the top of the head, or from the base of the head near the neck:

• you can weave fishtail from the forehead, or from different sides of the temples, moving from top to bottom,
• if you run a one-sided weave round the head or two from opposite sides, you get an incredible fancy basket,
• fish tail is obtained even with relatively short hair, if their length reaches at least 15 cm.

Once you have mastered the initial version of weaving, you will immediately get bizarrely put a braid on the picture, which are countless on the Internet, even if you have never done hair styling. The main thing is to understand the essence of the process.

Video tutorials: how to make a fishtail out of hair

You can learn all the styling, whether it be weaving a Fishtail spit in the form of a spike all over your head, on its side or turned inside out, with the help of detailed workshops in the video tutorials below. Thanks to them, you will learn how to weave your dream braid yourself without the help of a professional, decorating it with a ribbon or flowers. This method of hair styling is suitable for girls with hair just below the shoulders, and for long-haired ones.If you want to create a unique image with the help of weaving, fish braid is ideal.

How To Weave A Fishtail - A Beginner's Guide

The name fishtail was formed from the literal translation of the weaving technique from English. A simple philistine is more known as a spikelet or Christmas tree. For each type of hair, different variations are used to create volume. So, even on thin hairs the effect of thick hair is obtained.

What is necessary?

To create a hair does not require special tools and accessories.

The simplest items used in daily care will be useful:

• several combings (with thin and large teeth, with an extended handle),
• styling products. spray,
• thermal water in the case of ironing,
• a mirror (if the braid passes through the center of the crown and the back of the head, 2 mirrors are useful for quality control),
• gum for fixing.

Additionally, you may need ribbons, hairpins, hairpins with decorations for a festive look.

How to weave?

1. Spray hair spray and gently comb, directing the strands to the back of the head.
2. Assemble the tail on the back of the head and secure it with a rubber band. The level is chosen at will.
3. Separate the thin strand from the bundle, wrap the gum with it, and fasten the ends with a pin. So be able to disguise the base of the spit.
4. Divide the tail into two equal parts and separate a small bunch from the outer edge of the right curl, redirect it to the left curl.
5. From the left strand on the side of the outer edge, once again separate the bundle, equal in thickness to the first, and redirect it to the right strand. To correct the resulting crossing, pulling bunches.
6. Alternately, repeat the procedure for the redistribution of the beams, selecting them only from the outer edges. At the same time it is important to observe a uniform thickness.
7. The end of weaving is fixed by an elastic band. The tail of the remaining hair can wrap the place of fixation and chop hairpin.

Mastering the technique is easy, you just need to understand the principle and consistency. You should first learn the classic weaving, it will help to quickly understand the difference between the options. The fish tail corrects the shape of the face, one has only to ask him the base in different parts of the hair.

For example, weaving made as high as possible will visually extend extra roundness. And to give more regular features to the triangular face by the strength of two pigtails, braided from the temporal part. Flight of fancy has no limitations in choosing the configuration of the braid.

Hair should be washed and dried before styling. Curly curls better align with ironing. Mousse or foam in a small amount will help fix the hairstyle and make it resistant to prolonged wear and weather disasters.

For other types of hair, it is enough to use a spray to make the strands smooth.

If its length is not enough, you can interweave overlaid bundles in the process. The contrast of shades will give an interesting effect. But it should be remembered that in any case the measure is important, so the main thing with overhead strands is not to overdo it.

Various options for weaving fishtail

Weaving variations differ in several ways:

1. The hardness of weaving strands.
2. Base, passing from the side (right / left).
3. The base, passing through the middle of the crown and neck.
4. Interlacing strands along the upper contour of the face contour or zigzag shape.
5. One spikelet, two or three.

The most popular fishtail types are:

Tail from the top

1. Collect the hair in a tight tail on the top of the head and secure it with a rubber band.
2. Dividing into two parts, use the technique of weaving to the tips.
3. The rubber on the base of the braid should be masked with a bunch of hair or a beautiful ribbon.
4. Wrap the elastic at the bottom of the hair and pin it down.

This hairstyle is easy to transform into the evening version, using beautiful accessories.

Spit on the basis of the classic malvinki

1. Carefully comb curls, spreading the hair back.
2. Separate the side strands, collect them according to the type of malvinki and connect with an elastic band.
3. Dividing the strands obtained into 2 equal parts, braid the braid.
4. Straight from the base, mid-length or closer to the ends in a pigtail weave a ribbon.
5. The end of the tail fix with a rubber band and tie a ribbon in the form of a beautiful bow.

Triple fish tail

1. Separate along the sides by a strand about 2 cm thick, join them in the middle of the nape with a rubber band.
2. To turn inside the formed tail, forming the base of the spit.
3. The next two strands on the sides are connected in a similar way and turned out.
4. Continue the process until the tips, then fix them with a rubber band.
5. Bottom can be decorated with a beautiful hairpin or ribbon.

This option only mimics weaving. Even a newbie will be able to do it, and the originality of the hairstyle is not inferior even to salon styling.

How to weave yourself?

Weaving is not difficult and, if desired, everyone can master the technique, having completed the sequence of directions of the strands. If the hair is curly by nature, to facilitate the process, you must first align them with a flat iron. Use thermal water to protect from high temperatures.

1. Carefully comb your hair, after sprinkling it with a spray for ease of separation of the strands.
2. Release the tail to one of the sides and divide it into 2 parts, equal in volume.
3. Separate a small bundle from the outer edge of the left curl, redirect it through the center to the right curl.
4. Repeat the process, but with the right strand. Detachable bundles should be the same volume for the formation of aesthetic weaving.
5. Alternately twist the separated beams from the left and right edges.
6. Fix hair ends with a rubber band.

The elongated hairs from the links will add volume and slight negligence, which is important in the new season.

Who is the hairstyle?

The most beautiful links of the weaving of fish tails are formed on a rigid thick head of hair from the shoulder blades and below. Dense structure and smooth hair create a picture of incredible beauty.

But this does not mean that others are limited in choosing a trendy hairstyle. Thin strands during weaving are not tightened, and after fixing the tip they stretch even more, forming the desired volume. The braid turns out to be gentle, like a real cone.

A very interesting result can be obtained on melirovannyh or colored strands. Curls of different shades will give extravagance weaving.

Variations on the spikelet are numerous, which makes it possible to braid the braid on almost any hair that is suitable in length.

The only limitation is the natural small curls, but this is fixable if you make the alignment with the ironing. It is worth noting that such a procedure can not be performed daily. Frequent heat treatment will weaken the hair structure, resulting in brittleness and a section of the tips.

Articles we are proud of

Weave spike itself

Instructions for weaving double braids

How to weave a pigtail "Spike"

Casual light hairstyles for long hair

How to braid the braid on its side

Beautiful and easy hairstyles for girls with medium hair

How to weave a beautiful braid on long and medium hair: step by step instructions and schemes

How to make a fish tail? Although it is said that the braid is intertwined from two strands, this is not quite the case. Two curls are available just translate among themselves, but the fish spit will not work. Two large strands participate in the process and new thin ones are gradually applied to them.

Fishtail Weave Pattern

Make a pigtail from the forehead diagonally to the ears. However, let's start in stages, so that it becomes clear.

1. Moisten the hair a little (so as not to fly apart) and comb it on 2 sides.
2. On the left we take two adjacent upper strands, put the cross - crosswise.
3. From the one left strand we separate the thin part, apply it on the palm to the right.
4. From the same side, we take away the thicker strand that lies freely lying in the neighborhood, add to the thin one.
5. We repeat the same movements on the right side - we separate the thin strand from the main one, put it in the arm,
6. Add a thick strand of loose hair, not previously involved in weaving.
7. To get a long fishtail braid, weave strands of chignon: fasten your hair and false ones with a ponytail.

Long braid fishtail with chignons

How to make a beautiful fish tail on short curls step by step

Here are two options for the beginning: to braid from two loose strands, or fasten them in the tail (which is much easier) and divide it into equal two parts. Elastic in the finished hairstyle fish tail can be masked with a bow, flower, hairpin.

Technique of performance on the contrary, weaving:

1. on the upper region of the head, we select a thin strand, divide by two, cross,
2. from the left temple we take a thin strand, hold under the left main strand, connect with the right,
3. We do the same on the right side, select the order, drag it under the right side, connect it to the left side.
4. weaving is carried out until the moment when there will be no free strands, then you need to weave the tail in the usual way.

What is the point: the fishtail is woven with the attraction of loosely lying thick strands, they alternately weave into those that lie in the palm, that is, from which they began to weave. At the same time, thin ones (of the two main ones) are separated and woven in, and the adjacent neighbors are wide.

Fishtail Weave Pattern

Weaving options for girls for school: spikelet, a fish tail

The fishtail looks delicately when changing the order of the plexus of curls, that is, the strands do not overlap over the braid, but are passed under it, it turns out the opposite.

If the hair is not thick, the fishtail should be made fluffy, the strands should not be tightened tightly, a slightly sloppy look will look at home cozy and will give volume.

During weaving, add curls with ribbons, colored patch strands, beads on threads, other long decorations.

Decorate the braid with a wreath of flowers, a diadem, and studs with precious stones.

You can combine different weaving, for example, weave two braids from the forehead into one at the back of the head.

Wrap a fish tail near the magnificent beam on the head of a graceful hat-like.

If weave to the side, it will give charming simplicity, and a strict smooth braid will fit the formal setting, released exactly in the middle of the back.

Beautiful fish tail weaving

Hairstyles with the technique of performing a fish braid are beautiful on their own, intricate weaves, in general, do not need any accessories, but be sure to decorate it for a festive evening, but so that the accessories do not overshadow the true beauty of your beautiful hair.

What hair is performed on

Laying suitable for both straight and wavy long and medium length curls different density. It looks great on natural curls and hair with multicolor coloring. The volumetric weaving emphasizes the play of the strands and makes the braid even more interesting.

Weaving technique

The technique of braiding fishtail fishtail is quite simple. Before braiding the pigtail, you must carefully comb your hair and slightly moisten it with a special spray or plain clean water to remove excessive fluffiness and electrification.

Hair should be clean and smooth. It is most convenient to weave a braid on straight curls; they will not be fussed and confused in the process of creating styling.

For weaving need:

• frequent comb with a thin tip,
• scrunchy.

1. It is necessary to divide the curls with a vertical even part into 2 equal parts.
2. Separate the top layer of hair.
3. Select on the order right and left from the top layer.
4. To twist the extreme right strand from the extreme left — both strands should appear in the center of the whole mass.
5. Re-select the rightmost and left strands and twist them in the same way.
6. Weave until all strands are joined into a braid,
7. The tip must be secured with an elastic rubber band.

In this technique of weaving is created classic version fish tail.This braid is suitable for everyday styling or can be the basis for a more original hairstyle.

To master weaving video will help:

Options hairstyles based on the weaving set. There are many training lessons, photo and video master classes that will help to master them. Here are some of them.

Bulky tail

This installation is suitable for everyday look, and for the evening out. In order to make it more elegant, it is enough to decorate the base of the tail with a hairpin and choose the appropriate clothes and accessories.

To complete the hairstyle you will need:

• Frequent comb with a thin tip.
• Elastic.
• Thin silicone gum.
• Clip for decoration.
• Hair spray.

1. All curls collected in a high tail on top.
2. Divide it into 2 parts, select the rightmost and left strands - they should be very thin for more frequent weaving with a lot of “scales”.
3. Run weaving in classic techniquewhich is presented in the video. Fasten the tip of a thin silicone rubber band, which must be hidden by separating the strand from the tip of the hair and wrapping the elastic band with it.
4. Next, you need to give the spit a three-dimensional look, pulling alternately strands on the right and left sides.
5. Using a frequent comb, fluff the spit a little with the “pile” method.
6. Fix the result with hairspray.
7. If desired, decorate the base of the tail with a barrette.
8. Hair is ready!

You can get acquainted with the detailed implementation of the hairstyle on the video:

Crown of hair in the style of Russian beauty

Romantic neat styling will decorate the head of every girl. It is suitable for any image, situation, age and hair type.

To perform the installation will need:

• Frequent comb with a thin tip.
• 2 thin hair ties.
• Studs, invisible.
• Hair spray.

1. Divide the curls into 2 parts arbitrarily parted.
2. Braid each half in a fishtail, fasten with rubber band.
3. Give the spit volume by stretching the strands.
4. Wrap each oblique area of ​​the bangs like a crown, gently secure, hiding the tips.
5. Hair is ready!

Another version of the romantic hairstyle presented on video:

High hairstyle based on fishtail

Laying fit for an evening out. Very simple in execution, it looks very interesting and solemn.

To complete it, you will need:

• Frequent comb with a thin tip.
• Thin scrunchy.
• Studs, invisible.
• Hair spray.

1. Select a strand about 3 cm wide in the center with two straight partitions.
2. Weaving is performed on the selected part. Separate 2 thin strands and start weaving the fishtail, gradually adding all the other curls to the braid. Finish on the crown part. Tip secure with a rubber band.
3. Gather the curls in a high tail.
4. From the tail weave a fish braid, secure the tip with an elastic band. Pull the strands, making the weaving volume.
5. Start to obvivat tail base oblique, securing the structure with pins. It is necessary to hide the tip of the pigtail and spray the styling with varnish.
6. It turned out an unusual bunch of hair.

You can familiarize yourself with another variation of the beam using a fish tail by watching the video:

Spit in the form of bows

Pigtails in the form of bows look very elegant and are ideal for girls of all ages - from schoolgirls to young mothers.

1. Comb the whole hair back.
2. Separate the hair at the level of the temples with a horizontal parting.
3. Tie it with a thin rubber band.
4. Divide the ends in half.
5. Form one part of the bow by stretching the strand through the elastic, but not pulling it out completely.
6. Cross the gum again and fix the second part of the bow with it.
7. For reliability, pin him with studs.
8. Step back a couple of centimeters and tie the tail again.
9. Divide it in half and form a bow on the already known principle.
10. Repeat these steps again so that the last bow is at the level of the neck.
11. Gently stretch the weave by hand.
12. Secure hair with lacquer and hairpins.

French braid

Beautifully braided French braid - the perfect solution for a variety of events. She will give your look charm and make it incredibly feminine.

1. Comb back all the hair.

2. Separate the hair at the temples level with a horizontal parting and tie them into a “malvinka”.

3. Separate the thin strand and wrap the gum around it, hiding the tip under the hair and pinning it with stealth.

4. Just below, separate another small section and tie it as well.

5. Divide the first tail in half and skip both halves under the second tail.

6. Lift the second one up and clip it with a clip so that it does not interfere.

7. Below separate another section and tie it with an elastic band.

8. Release the second tails from the clamp, split it in half and skip both halves under the third.

9. Continue weaving to the desired level. Do not be lazy and braid the French braid along the entire length.

10. Gently stretch the spit sections with your hands. This will hide the gum and make styling lush.

You can also braid the braid around your head in the same way - ideal for holidays and work.

To braid such hearts, it is not necessary to own a complex technique of French weaving. Enough to stock up a few elementary items.

1. Comb back all the hair.

2. Separate the two strands from the forehead area and connect them with a rubber band on the back of the head.

3. Turn the tail through the hole in the middle.

4. At the temples, separate two more strands.

5. Connect them to the tip of the first tail and tie, stepping back a couple of centimeters.

6. Turn the tips through the hole inside the hair.

7. Tie the third tail of the remaining strands and also turn them around its axis.

8. Stretch the inner parts of the weave with your fingers, giving them the shape of hearts.

Fishtail gum

How to weave a fishtail, not owning the classic technique? Our detailed master class will help you to easily cope with this task. In just a few minutes you will be able to create such a stylish hairstyle that will not remain without attention of others.

1. Comb it back.

2. On the left and right side, separate the two small strands. The thinner they are, the more beautiful the spit will be.

3. Connect them to each other in the back of the head. Do not overtighten the gum - it will have to be lowered down.

4. Separate on both sides of the head one more fine strand and join them immediately under the first tail.

5. Form an inverted tail by turning the second pair of strands under the elastic of the first pair. It is important not to hook the central hair, otherwise the styling will look sloppy.

6. Separate again on a fine strand on both sides and tie them up.

7. Turn this pair under the gum that secures the first tail.

8. Continue to select the side strands, and connect with each other and skip under the rubber of the first tail. To increase the length of the spit, gradually lower the gum down, only very carefully so that it does not tear.

9. In the final stages, when almost the entire length will be woven into the braid, do not throw it over the elastic band, but simply tie it in the center.

10. Slightly stretch the sides of the weave with your hands so that the fishtail becomes as lush as in this photo. The tip can be decorated with a bow, hairpin or ribbon.

It is fast, easy and original styling for long strands.

1. Tie a head of hair at the base of the neck.

2. Stepping back a few centimeters from the elastic, tie another one. The distance between them depends on the length of your hair and your preferences.

3. Divide this section in half.

4. In the resulting hole, stretch the tips of the strands.

5. Retreat the same distance and tie another gum. Form an inverted tail.

6. Continue weaving to the desired level.

This incredibly complex braid will be an excellent choice for special occasions. No one would ever think that you created it yourself! Watch this workshop and follow the entire process step by step.
1. Comb the hair on the side parting and wind the iron. This will give your hair extra volume.

2Separate the hair with a horizontal parting at about the level of the lobes and clip it with a clip so that it does not interfere.

3. On the left side near the ear, separate the small strand and tie it to the tail.

4. Pull it through the base.

5. Lightly stretch its sides with your hands.

6. A little lower take two more thin strands, tie them and turn out.

7. Continue turning the ponytails along the entire length in this part.

8. Release the main part of the hair from the clamp.

9. Separate the small sections from the sides and clip them with clamps.

10. Braid the center of the fishtail.

11. Tie the tip and gently stretch the sections with your hands.

12. Wrap this oblique first weave. Hide the tip inside and stab the invisible.

13. Strand the sides free from clamping.

14. Braid French braids from them, picking up loose curls from one side only.

15. Pass them through the base of the fish's tail and wrap an already formed hairstyle. Hide the tips inside and stab the stealth.

16. Spread the styling, giving it pomp.

Openwork braid of gum

This voluminous corrugated braid will make you look like one of Disney princesses.

1. Carefully comb your hair.

2. Pierce the bulk of the hair, leaving only the lower section.

3. Walk on it with an iron with a nozzle corrugation.

4. Gradually release the new sections of hair and process them with a flat iron.

5. Tie the hair on top.

6. Divide into four parts. Two extreme tie between a thin silicone rubber band.

7. Slightly stretch the weaving with your hands, pulling the strands up.

8. Again we make a tail of extreme strands and stretch it with our hands.

9. Repeat these steps for the remaining length, gently stretching each section.

Spit their tails

Spit tail with rubber bands will be the best option for everyday wear for work or school. Hair will not interfere, because you put them in an elegant hairstyle.

1. Comb the hair back.
2. Horizontal partitions divide it into three equal parts.
3. Tie each with a rubber band.
4. Turn the first tail around its axis, making it twisted.
5. Connect the ends with the next tail and repeat the same action.
6. Connect the tips of the two tails to the third and repeat the process again.
7. Straighten the braid of rubber bands and tails so that it is lush.

How do you like that?